Power switch
STOP
R
RETAKE
Chapter 5
Date/Time Insert
You can display the date and time in the camcorder
or on a connected TV, as well as to record them
manually or automatically.
You should have already performed the Date/Time
Setting procedure (see page 22).
1.
MENU
dial
2.
3.
4.
POWER
indicator
F
Advanced Features
Set the Power switch to
(The POWER indicator comes on.)
Press in the MENU dial. (The CAMERA MENU
appears.)
Rotate the MENU dial to highlight DATE/TIME
DISP. Press in the MENU dial to select it. (The
DATE/TIME DISP. menu appears.)
Rotate the MENU dial to highlight the desired
mode. Press in the MENU dial to select it. (The
desired mode is activated.)
Notes:
DISPLAY
•
The selected display can be recorded.
•
If you do not want to record the display,
select the OFF mode before shooting.
AUTO DATE
•
In this mode, the date is replaced after 5
seconds with AUTO DATE but isn't
recorded.
•
Your camcorder automatically records
the date for about 5 seconds after you
do the following:
•
Change the date.
•
Load a tape.
•
Select Auto Date Record mode
by rotating the MENU dial.
(manual record).
M
69