Table of Contents
Advertisement
Date and Time Display
Record the Date, Time, and Title Displays
You must install the clock cell and set the date and time (as shown on the previous
pages) before the you can select and record the correct date and time. You must
create your title (as described on pages 46-47) before you can select and record it.
Select Date, Time, Date and Time, AUTO DATE, or Title You
Created to Record On Your Tape
1. Attach a power supply and set
POWER switch to CAMERA. The
power indicator lights.
2. Make sure the AE dial is not set to
AUTO to select any mode except
AUTO DATE.
Note: AUTO DATE is selected when the
AE dial is set to AUTO.
3. Repeatedly press the DATE/TIME
button until the display you want to
record appears in the viewfinder.
4. Select date, time, date and time,
AUTO DATE, or the title you created.
• Date Display: The date is dis-
played and recorded.
• Time: The time is displayed and
recorded.
20
DATE/TIME
Button
• Date and Time Display: The
date and time are displayed
and recorded.
• AUTO DATE: The date is auto-
matically recorded for approxi-
mately five seconds and then AUTO
DATE is displayed whenever:
• The date has been set or
• This display mode has just been
• The tape has been changed or the
• Title: The title you have created is
displayed and recorded. No display
appears if a title has not been created.
• No Display: No display is dis-
played or recorded.
AE Dial
changed.
selected.
tape compartment opened.
Advertisement
Table of Contents
