Silvercrest SDBS 2200 A1 Operating Instructions Manual page 11

NOTES
GB
IE
The steam iron station is equipped with a safety valve which regu-
►
lates the build-up of excess pressure in the pressure vessel during
the heating-up phase, and vents excess steam through the steam
outlets on the underside of the ironing station This means that
there may be a slight escape of steam after switching on. This is
normal behaviour and lasts just a few seconds It does not indicate
a defect in the steam iron station.
If steam or hot water droplets escape from the Calc / Lock /
►
Safe screw cap during heating, switch off the appliance and let it
cool down. Turn the Calc / Lock / Safe screw cap clockwise and
tighten it. If steam or water droplets continue to leak out, switch
off the appliance and contact Customer Service.
Under no circumstances should you try to unscrew the Calc /
►
Lock / Safe screw cap while the steam unit is hot and under pres-
sure. The Calc / Lock / Safe screw cap can only be unscrewed
when the appliance has cooled down.
8
SDBS 2200 A1