Brother P-Touch QL-570 Service Manual page 98

[ 2 ] Use Procedure of Maintenance Software
(1) Start up this software.
(2) Connect the machine to your PC with the USB cable and turn the ON/OFF button ON.
(3) Enter the serial number from the keyboard.
[ 2-1 ] "Write default EEPROM data"
Reset the setting value of the EEPROM to the factory default value.
(1) Click the [(0) Write default EEPROM data] button.
When initialization of the EEPROM is complete, the result is displayed in the "Results"
column.
Fig. 8
9