Brother P-Touch QL-570 Service Manual page 121

(4) Once the auto power-off setting is written properly, the window below appears. Press the
[OK] button to close auto power-off setting tool.
Fig. 43 Window appears when the writing completed properly
Note: When the auto power-off setting is failed on writing, the window below appears.
(1) When the connected printer is not same with printer selected on auto power-off setting tool,
error message below appears. Check the "Printer:" field on auto power-off setting tool
again. (See fig.42)
(2) When the auto power-off setting tool is used for printers do not satisfy required condition 2
on page 31, error message below appears. Check printer's configuration.
Fig. 45 Auto power-off non-compatible error
Fig. 44 Transmission error
32