Protecting The Environment - DeWalt D21580 Original Instructions Manual

E N GLIS H
Optional Accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
DUST EXTRACTION SYSTEM (FIG. 6)
The D27902 dust extractor (i) ensures a proper and
safe discharge of dust in all drilling applications.
The D215804 dust extraction device (h) is required
to accommodate the assembly for dry drilling
applications.
WATER PUMP (FIG. 7)
Removing debris from the working area and cooling
the core bit in wet applications, the D215824 water
pump (m) ensures water supply where main water
supply is not available.
DRILL STAND (FIG. 2, 7)
The D215831 drill stand (k) allows your diamond drill
to be used in stationary applications for increased
accuracy, comfort and stability. The D215834
reduction ring is required to make the collar of the
drill fit in the drill holder.
WARNING: DO NOT use the stand with
a vacuum pump on a wall or ceiling.
Alternatively: The D215821 drill stand (j) enables a
quick set-up for stationary use of your diamond drill.
The D215822/D215832 water collection ring (14/16)
is required to accommodate the assembly for wet
drilling applications.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
42
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
WALT, have
E
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
WALT product
E
WALT products once they have
E
E
WALT