Ventilation Requirements - AEG SCT51800S0 User Manual

14 www.aeg.com

7.4 Ventilation requirements

5 cm
7.5 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
min.
200 cm
2
x
• Remove the lower door.
• Loosen the lower pin.
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Refit the pins (B) and the spacers (C)
on the middle hinge on the opposite
side.
• Install the upper door.
• Tighten the spacer and the upper pin.
The airflow behind the appliance must
be sufficient.
min.
200 cm
2
Do these steps.
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
x