Setting Up The Grill; Before Grilling; Operation - tepro VISTA Instruction Manual

8. Putting the BBQ grate in place
Hold the BBQ grate (4) by the
handles and place it on the mount-
ing recesses in the windshield at the
desired height. Two different heights
are available. The BBQ has been
completely assembled.
I
mportant: Tighten all screws.

Setting up the grill

Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
grill's stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
• Before use, place the grill on an even,
sturdy surface outdoors.
P170060_TEPRO_1066_Vista_K_DE_GB-20170831.indb 21

Before grilling

• Prior to first use, wash the cooking grate
with warm soapy water.
• Pre-firing
Before you use the grill for the first
time, it needs to be conditioned (pre-
fired) for at least 30 minutes at a tem-
perature of 100° – 200°C.
This is necessary in order to make the
inside ready for barbecuing and to burn
in the heat-resistant paint on the out-
side.

Operation

Danger Risk of burning!
The BBQ, the charcoal and
BBQ meat become very hot
during use. Any contact can
result in serious burns.
– Keep sufficient distance from the hot
parts, since any contact can lead to se-
vere burns.
– Always wear oven or BBQ gloves when
grilling. (Glove Category II with regard
to heat protection, e.g. DIN-EN 407)
– Use only long-handled utensils with
heat-resistant grips.
– Do not wear any clothing with wide
sleeves.
– Use only dry lighters or special fluid
lighters compliant with EN 1860-3 as
firelighters.
t
21
31/8/2017 3:11 PM