Maintenance & Care - Bissell 2458 User Manual

Maintenance & Care
Empty dirty tank
1. When the dirty tank reaches the "FULL" line
on the tank it is time to empty.
2. Remove dirty tank and carry to a utility sink,
toilet or outside (where you will
dispose of the dirty water).
3. To unlock the dirty tank lid, rotate handle over
the back of the tank. Remove lid and pour out
dirty water. Rinse out dirty tank
to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5.
Before replacing tank on machine, wipe
debris from red filter.
Cleaning machine
1. Remove and rinse the tools under clean,
running water. Allow tools to dry.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose.
Then lift end of hose and stretch out to
ensure all water is cleared from hose.
3.
Wrap the flex hose around the hose wrap
and secure with latch.
Machine care (check regularly)
Cleaning Debris Filter
1.
Remove all hair and debris from the red
filter.
2.
Place the Dirty Water Tank back onto the
machine.
Machine storage
Store machine in a protected dry area.
8
www.BISSELL.com
WARNING
To reduce the risk of fire, electric shock, or injury, turn
power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting.
2.
4.
Tip
For best results
empty, rinse and
dry tanks and tools
before storing.
Debris
Filter
NOTICE
To reduce the risk of a leaking condition, do not
store unit where freezing may occur. Damage to
internal components may result.
3.
5.