goodnature X-1 mini pro Owner's Manual page 9

Section 4:
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Assembly
4
Place the moving platen into the press chamber.
The bag pins should be facing the back of the
press, at the top. The grooves of the platen should
be facing the front of the press.
5
Place a FreshFilter Press Bag™ into the chamber
with the open side facing up. Insert your hand
into the bag and push the bottom of the bag down
to the bottom of the chamber and into each of the
corners. Firmly push each side of the bag over the
bag pins, piercing the material at least 0.5 inch
from the edge of the bag.
09
28