goodnature X-1 mini pro Owner's Manual page 18

Section 6:
SHRED
When grinder is fully assembled and in the "down" position, pressing the "Shred" button will engage the grinder.
Drop
As a safety feature, the grinder disc will stop spinning and the "Shred" button will flash while the hopper door is open.
Drop
When the hopper door is closed, the grinder disc will begin spinning again.
Drop
Press grinder button a second time to stop grind cycle. Alternatively, the "Stop" button can be pressed to stop the
Drop
grinder.
If the hopper is open for more than 45 seconds, the grind cycle will cancel automatically as a safety feature.
Drop
Solid lighted "Shred" button means that the disc is spinning.
Drop
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Operation
POWER SWITCH
The power switch is located on the bottom of the
machine towards the front.
Power switch controls power to both the grinder
and press.
Engage power switch by switching to the "on"
position.
18
28