goodnature X-1 mini pro Owner's Manual page 24

Section 7:
1
Follow manufacturer's instructions for use of chemicals for cleaning and sanitizing food contact surfaces and
verify that they are approved by your local health authority.
2
Wash, rinse, and sanitize all food contact surfaces of cold press juicer:
A: After each use.
B: Any time contamination occurs or is suspected.
C: At a minimum of once every four hours while the machine is in use.
3
Wash, rinse, and sanitize food contact surfaces in adherence to local health regulations. We recommend the
following procedure:
A: Wash surface with detergent solution.
B: Rinse surface with clean water.
C: Sanitize surface using a sanitizing solution mixed at a concentration specified on the manufacturer's label.
D: Place wet items in a manner to allow air drying.
DISASSEMBLY AND CLEANING THE PARTS
1
With the power switch in the "Off" position, disassemble the grinder and place parts aside. For detailed
disassembly instructions, follow the steps in the "Assembly" section in reverse.
2
We recommend rinsing the grinder in the "Down" position while the press chamber, juice catch tray, and an empty
juice container are in-place. The dirty water will collect in the juice container. Doing this step now will make
cleaning the machine easier.
3
Remove the press chamber with moving platen, juice catch tray, and juice container.
4
Take all parts to sink for washing and follow local health regulations for cleaning. This usually involves washing,
rinsing, and sanitizing.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Cleaning
24
28