Izip VIA MEZZA Assembly Manual page 7

Before your first ride...
• Remove all remaining packaging on the bike.
• Check the operation of your front and rear brakes
• Check the tightness of all nuts and bolts
, especially the stem bolts and the bolts securing the brake levers and shifters to the handlebars.
• Make sure the stem's wedge bolt is tight.
Check that it is tightened properly by standing over the front wheel, holding it with your thighs, then
trying to turn the handlebars. If the handlebars can be turned independently of the wheel, the wedge bolt must be tightened further.
Make sure all frame quick release levers are tightened securely.
•
information.
• Make sure your front wheel is secure in the frame.
• Make sure your tires are filled to the pressure recommended on the sidewall.
a fall. We recommend using a bicycle pump with pressure gauge.
• Test power
: lean the bike on its kickstand, raising the rear wheel off the ground. When the bike is powered on (indicated by the throttle lights ) you
can test system power by twisting the throttle and watching the rear wheel. Refer to the troubleshooting chart on this page for assistance if the bike
will not power on.
Refer to owner's manual for detailed troubleshooting chart
Bike won't turn on (no lights on Battery not seated properly against rack terminals
throttle) Need to press handlebar ON/OFF switch
Battery not charged
Throttle lights work, but motor Bike may be in Pedal Assist mode. Press the green button next to
will not run the throttle to change to Twist-and-Go mode.
Brakes rub when riding Re-adjust brakes, referring to owner's manual
Gears/chain make clicking or Re-adjust drivetrain, referring to owner's manual
grinding noises while riding
Can someone help me with...? Call the Currie Technologies technical and customer service
department at 1-800-377-4532
1-800-377-4532
Currie Technologies
Technical and Customer Service
by pushing the bike forward and operating the brake levers.
See the appendix to this guide discussing quick releases for more
Over- or under-inflated tires can blow off the rim and cause
This page intentionally left blank
1-800-377-4532
Currie Technologies
Technical and Customer Service