Operation - Izip VIA MEZZA Assembly Manual

6.
Unlock the frame hinge by opening the quick release lever,
swinging it outward, then pulling the lever upward to disengage
the locking pin (Photos U and V). Fold the frame in half at this
hing.
This procedure is similar to folding the handlebars.
The bike, completely folded
1-800-377-4532
Currie Technologies
Technical and Customer Service
U
V
Installation:
Your bicycle comes with a 24 volt sealed lead acid battery. To install the battery, simply
space behind the seat , as shown in photo W. You may need to release the locking pin on the left side of the
bicycle to do so, as shown in the photo.
This type of battery does not have a 'memory', and riding on a partial charge will not harm the battery in any way.
Recharge time for this battery is 6-8 hours to reach a full charge.
To turn your bicycle on, simply toggle the battery's ON/OFF switch to the ON position. The lights on the
throttle (Photo X) will illuminate, indicating the charge level of the battery.
The Via Mezza uses the Currie "Twist and Go" (TAG) system. Simply twist the
handlebar-mounted throttle towards you to power up the motor.
Battery
W
slide it into the empty
ON/OFF switch

Operation

X
1-800-377-4532
Currie Technologies
Technical and Customer Service