Installation - Pentair Pool Products ’LIL SHARK GW8000 Installation And User Manual

STEP 1:
Straighten Hose
Remove hose from box and lay it
out in the sun to straighten.
STEP 3:
Clean System
A. While the hose is
relaxing, clean and
backwash your filter
system, skimmer and
pump baskets.
B. Close Main Drain if
your pool has one.
C. Start Pump.

Installation

922 0594
924 0594
STEP 5:
Submerge Cleaner
A. Start pump.
B. Turn cleaner upside down,
submerge, and feed hose down
side of pool wall to fill hose
with water.
STEP 2:
Check Parts
Make sure you have
all parts to pool
cleaner.
STEP 4:
Assemble Cleaner
A. Insert swivel assembly into
cleaner body and twist 1/4
turn clockwise to lock.
B. Set brush adjuster to '0'.
C. Slide long hose cuff
over swivel assembly
to install hose.
Compliments of www.poolsandstuff.com
5
Reducer
Swivel
Cone
Assembly
Vacuum
Hose
Regulator
Long Hose Cuff
Swivel
Assembly