How To Change Door Position - DAEWOO ELECTRONICS RN-341N Service Manual

P10
P2
P12
P5
P13
P6
P7
<Reference>
Disassemble "P8"
P8
P9
Disassemble "P9"
P9
Refigerator Door
P9
P1
P8
P4
P1
Disassemble "P10"
P10
lead wire
(cabinet)
lead wire
(door)
1-1>
Tilt down the appliance to the rear.
(Watch out for damage of Pipe Wire
Condensor
assembled in the rear of refrigerator.)
1-2>
P1
Disassemble following parts in order.
P1) 'Top Cover Hinge' and 'Top Hinge'
P2) 'Refrigerator Door'
P3) 'Middle Hinge'
P4) 'Middle Cover Hinge'
P5) 'Freezer Door'
P6) 'Under Hinge'
P7) 'Adjusting Leg '
P8) 'Cover Cabinet Harness'
P9) 'Cap Refrigerator Door'
P3
P10) 'Cover Door Harness Left'
P11) 'Cover Door Harness Right'
P12) 'Cap Freezer Door'
P13) 'Stopper Refrigerator/Freezer Door'
1-3>
Move following parts in the opposite position:
P9, P12, P13
1-4>
Change the position of following parts each
other and assemble them:
P6 & P7, P3 & P4, P1 & P8
Disassemble "P12"
P12
Freezer Door
Disassemble "P13"
P13
22

4. How To Change Door Position

1-5>
Assemble following parts:
P5, P2, P10, P11