Functions; Display - DAEWOO ELECTRONICS RN-341N Service Manual

2-1. DISPLAY

INPUT
- PCB Control Panel Button
- Temperature is controlled by "PCB Control Panel Button" assembled on the refrigeratior door.
- Features are model dependent.
LED step "5" (MAX)
LED step "4"
LED step "3"
LED step "2"
LED step "1" (MIN)
LED step "S" (S-COOL)
Reference Chapter No.
LED DISPLAY
ON Flicker
3 -
4 -
5 -
2-2
1 -
2 -
S -
3 4,5
2 4,5
1 4,5
2-8
2,3 4,5
1,3 4,5
1,2 4,5
2-3 3,S 4,5
CONTROL OBJECT
-PCB Control Panel LED
Temperature adjustment
button for refrigerator
compartment.
"Super Cool"
What's the Meaning
TEMP STEP "NOR"
TEMP STEP "MAX-NOR"
TEMP STEP "MAX"
TEMP STEP "MIN"
TEMP STEP "MIN-NOR"
TEMP S-COOL
ERROR "R SENSOR" (R1)
ERROR "RT SENSOR" (RT)
ERROR "D SENSOR" (D1)
ERROR "DOOR S/W" (DR)
ERROR "CYCLE" (C1)
ERROR "DEFROST" (F3)
Forced Defrost Mode
in Progress
9
MIN
How to Push Buttons
for the LED Display
Initial mode by power input
"TEMP" 1 time
"TEMP" 2 times
"TEMP" 3 times
"TEMP" 4 times
"S-COOL" 1 time
"S-COOL" continuously + "TEMP" 5 times
※The Priorities of Error Display :
R1 > RT > D1 > C1 > F3
▪ How to start the mode:
"TEMP" continuously + "S-COOL" 5 times
=> All LED ON for initial 3 seconds.
▪ How to confirm the mode after 3sec.:
"S-COOL" continuously + "TEMP" 5 times

2. FUNCTIONS

MAX