Do you have a question about the FRA-X22B series and is the answer not in the manual?
Questions and answers
Jacqui Jefferies
March 6, 2025
My fridge section of my fridge freezer is freezing everything solid, it has never done this before what do I need to do
1 comments:
Mr. Anderson
March 6, 2025
The fridge section of your DAEWOO ELECTRONICS FRA-X22B series fridge freezer may be freezing everything solid due to the following reasons:
1. Temperature Setting Too High – If the temperature is set to [High], lowering it to [Middle] or [Low] may help. 2. Low Room Temperature – If the ambient temperature is too low, the fridge may overcool. Ensure the room temperature is within the recommended range. 3. Food Placement – Storing food with moisture too close to the cold air spout can cause freezing. Try rearranging items to avoid direct exposure to cold airflow.
Adjusting these settings should help prevent food from freezing in the fridge section.
This answer is automatically generated
Related Manuals for DAEWOO ELECTRONICS FRA-X22B series
Disposal of Used Electrical & OBSERVE AMBIENT TEMPERATURE Electronic Equipment This refrigerator is designed to operate in ambient temperature specified by its category, which is marked on the rating plate The meaning of the symbol on the product, its accessory or packaging indicates that this product Climatic category Ambient temperature from...to shall not be treated as household waste.
Be sure to ground. Check if your wall outlet Be sure to keep for safety! is grounded (earthed). There is a risk of electric shock hazards. Read these safety instructions thoroughly and carefully before using. Please keep this user guide on hand for future Never unplug by pulling only the power cord reference.
Never store any flammable gas or liquid CAUTION in the refrigerator. Be sure to unplug the refrigerator when it is Never use flammable gas, benzene, thinners, not going to be used for a long time. gasoline, spray etc. near the refrigerator. There is a risk of fire, explosion and personal injury or damage.
Do not let the power cord be crushed by other LIGHT/FILTER button 1) Button for dispenser light on. (heavy) objects . 2) Button for filter exchange or reset. If you hear a strange noise, strong chemical odour After exchanging or to reset press the button or find smoke etc.
Lock button for control panel Non Dispenser Model Press button for more than 3 seconds to activate and prevent settings from being unintentionally changed. To release the button, press for longer than 3 seconds. The display goes out. Temperature Control Freezer Compartment Push the FRZ.
How to use the interior parts Non Dispenser Model Dispenser Model * This instruction manual refers to several models. The real features are model dependent. 1. Door storage compartment 6. Ice maker & storage for short-term storage of food and ice cream.
Food Storage Tips Refreshment compartment (Not all models) Wash foods before storing. Divide and separate foods into smaller pieces. 1. Softly press the upper centre of Home Bar to open (one-touch push type). - You can access the refreshment compartment without Place watery foods or foods with a lot of moisture in front opening the door thus saving electricity.
How to use the Dispenser How to use the Automatic (For dispenser models) Icemaker (For dispenser models) Select the 'WATER' or 'ICE' button and push the lever About 10 icecubes (14~15 times a day) are made at one smoothly with your cup. time.
Care & Cleaning Be sure to unplug first * The real features are model dependent. Dispenser Water Shelf Freezer & Refrigerator Pockets Remove the spill grill and clean the water shelf Hold both ends and pull up. regularly. (The spill shelf is not self-draining.) Freezer &...
How to Clean Problem Foods in the Interior Parts refrigerator get frozen. Use cloth with water and mild detergent to clean. Checkup Point Is temperature set to [High]? Is the room temperature too low? Is food with moisture stored close to the cold air spout ? Action Set the temperature to [Middle] or [Low].
Something strange? Don’t worry. Here is the answer. Case Explanation Pipes (refrigerant vessel) are placed beneath the Front and side of refrigerator feels Heat warm or hot. surface to prevent moisture forming on it. When you close the door and then open again immediately, the door is not easy to open.
Installation Preparation If the refrigerator can not pass through a door Check if the refrigerator can pass a during installation, follow doorway or enter a door first. these steps. (This guide refers to several models. The real features are Dimensions (including Door Handles) 906mm 735mm 1770mm (Width*Depth*Height) model dependent.)
Turn the hinge fastener tightly to the end. Removing Refrigerator Door Connect harness wirings and screw down the ground wire. Unscrew top hinge cover with a screwdriver. Insert a thin screwdriver into the side groove of the cover to remove. Fasten the bending tube guide and insert the water tube far into the coupling.(Dispenser models only) Turn top hinge fastener counterclockwise 3~4 times.
Refrigerator Leveling & If the refrigerator door is not balanced by step 1, then follow the next steps. Door Adjustment (If needed) The refrigerator must be level in order to maintain optimal Insert a spanner (A part) into the hinge nut (1 part) and performance and desirable front appearance.
Figure B How to install Water Line (Dispenser models only) 1. The water pressure should be 2.0~12.5 kgf/cm² (1.96 ~12.26 Bar) or more to run the automatic icemaker. Check your tap water pressure; if a cup of 180cc is full within 10 seconds, the pressure is OK. 2.
Need help?
Do you have a question about the FRA-X22B series and is the answer not in the manual?
Questions and answers
My fridge section of my fridge freezer is freezing everything solid, it has never done this before what do I need to do
The fridge section of your DAEWOO ELECTRONICS FRA-X22B series fridge freezer may be freezing everything solid due to the following reasons:
1. Temperature Setting Too High – If the temperature is set to [High], lowering it to [Middle] or [Low] may help.
2. Low Room Temperature – If the ambient temperature is too low, the fridge may overcool. Ensure the room temperature is within the recommended range.
3. Food Placement – Storing food with moisture too close to the cold air spout can cause freezing. Try rearranging items to avoid direct exposure to cold airflow.
Adjusting these settings should help prevent food from freezing in the fridge section.
This answer is automatically generated