Analogue Display Heads; Automatic Codelock Systems; Manual Codelock System; Enabling Codelock - Raymarine Maxiview ST80 Operation & Setup

59
ST80 Maxiview Operation & Setup

4.2 Analogue Display Heads

Automatic CodeLock Systems

In an automatically transmitted CodeLock system, the Maxiview
reads the code number and starts-up automatically without any user
input.

Manual CodeLock System

In a manually transmitted CodeLock system, the code number is
entered via the keypad of any master display head. This code is then
sent to all compatible equipment on the same SeaTalk bus. Once this
code has been received, the equipment operates in the normal way.

4.3 Enabling CodeLock

The CodeLock security feature can only be switched on from a
Masterview display head. Therefore, please refer to the Masterview
Operation & Setup manual for details.