Summary of Contents for Juguetronica MICRODRONE AUTOFLIGHT
Page 1
2. It uses the 2.4 GHz frequency which offers a long range signal and permits several devices to fly within the same area without interference. Additionally, pilots can control forward/ backwards flying, left/right turns, and left/right flying. 3. Please, read this manual carefully before using your Microdrone Autoflight and keep it for future reference.
DRONE PARTS Propeller guards Propellers Battery charging dock On/Off switch INCLUDES 4x Propellers 1x USB cable (2x A and 2x B) TRANSMITTER COMPONENTS Power and turn stick (rise/descent, left/ Direction stick (forward/backwards, right turns) left/right) Power LED Acrobacy (tap). Headless mode Speed (tap).
"AAA" batteries. cover. MICRODRONE AUTOFLIGHT CHARGING Connect the quadcopter to a PC USB dock using the supplied charging cable. When the USB plug is lit, it indicates that battery is charging. When the indicator turns off, the battery is fully charged (takes about 30 minutes).
Page 4
2. FLYING AREA To get you acquinted with Microdrone Autoflight, we recommend you to try it on windless days. Make sure you are away from other people, animals, or any kind of obstacles.
FLIGHT MODES Mode 1: Automatic take-off and landing Automatic take-off and landing Once drone and transmitter are already binded, press the automatic take-off/ landing button once. The drone will take off and will remain in stationary flight at a height of approximately 1.5 meters.
Page 6
OPERATION AND FLIGHT CONTROL UP / DOWN Rise Push the left stick upward to increase propeller speed for the drone to rise or push it down to reduce propeller speed so the drone will descend. Descend ATTENTION: This drone is equipped with automatized height system. When you release the stick, it will automatically remain at that height.
Headless mode mode Front ACROBATICS Microdrone Autoflight can perform stunning 360º acrobacies. To achieve this, press the right stick while drone is flying. When you hear the signal (fast intermittent beep), the drone will perform the trick in the direction you push the steering stick.
Page 8
TRIMMING OPERATIONS If Microdrone Autoflight does not fly steadly, it must be trimmed so it flies correctly again. To do this, follow these steps: Place the drone on a horizontal surface, turn it on, and start binding process (see “Drone and transmitter binding"...
Need help?
Do you have a question about the MICRODRONE AUTOFLIGHT and is the answer not in the manual?
Questions and answers