Safety Instructions; General Safety Precautions; Battery Handling Guide - LG RESU 10H DLT Product Manual

1.2 Safety Instructions

For safety reasons, installers are responsible for familiarizing themselves with
the contents of this document and all warnings before performing installation.

1.2.1 General Safety Precautions

Over-voltages or wrong wiring can damage the Battery Pack and cause
deflagration, which can be extremely dangerous.
Avoid installing the Battery Pack where flammable materials are stored.
Do not install in places where explosive gas or chemicals are present.
The utility grid, solar input, and battery voltage must be disconnected
from the Battery Pack before wiring. Wiring must be carried out by a
Qualified personnel. Battery Pack is not user serviceable. High voltage is
present in the device.
The electronics inside the Battery Pack are vulnerable to electrostatic
discharge.
Be sure to be grounded before handling the Battery Pack.
Read the label with Warning Symbols and Precautions, which is visibly
under to the Battery Cover (see Section 1.3)

1.2.2 Battery Handling Guide

Do not expose battery to temperature over 50℃ and open flame.
Do not damage the unit in such ways as dropping, deforming, impacting,
cutting or penetrating with a sharp object. It may cause a leakage of
electrolyte or fire.
Do not connect anode and cathode terminal block opposite direction.
Do not charge or discharge damaged battery.
Do not place any foreign objects on the top of the Battery Pack and on the
cooling fin.
Do not put the battery pack upside down on the ground.
Do not disconnect, disassemble or repair by an unqualified personnel.
Services must be made by qualified personnel only.
1. Safety