Clearances; Tools & Safety Gears Required - LG RESU 10H DLT Product Manual

3.1.4 Clearance (TBD)
3.1.5 Tools & Safety gears required
 Tools
The following tools are required to install the battery pack :
Precision screwdriver
Drill
(Min. Diameter 10mm, 0.4'')
 Recommended clearances (>12'') on
the left, right, top and bottom of the
product is shown in the figure for the
proper ventilation and installer
convenience.
M6 Torque wrench
Pencil or Marker
3. Installation
Inclinometer