Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Allen-Bradley Flex integra 1793-IB16
Summary of Contents for Allen-Bradley Flex integra 1793-IB16
- Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
-
Page 2: Installation Instructions
Installation Instructions FLEX Integra 16 Sink Input Module (Cat. No. 1793-IB16 and -IB16S) Module Installation This module mounts on a DIN rail. It connects to an adapter or another FLEX I/O or Integra module. Note: If using this module with FLEX I/O modules, do not mount between FLEX I/O modules. - Page 3 FLEX Integra 16 Sink Input Module 4. Press down to lock the module on the DIN rail. 30870-M If the module does not lock in place, use a screwdriver of similar device to move the locking tab down, press the module flush with the DIN rail and release the locking tab to lock the module in place.
-
Page 4: European Union Directive Compliance
FLEX Integra 16 Sink Input Module ATTENTION: Do not remove this module under power. Removing this module under power will break the electrical backplane (flexbus) connections. This can cause personal injury or property damage by: • sending an erroneous signal to your system's field devices causing unintended machine motion •... - Page 5 FLEX Integra 16 Sink Input Module Wiring This module is available with 2 styles of terminations: 1793-IB16 - screw-cage and 1793-IB16S - spring-clamp. Refer to the wiring figure below. 1793-IB16 4 5 6 7 9 10 11 12 13 14 15 41816 1793-IB16S 9 10...
-
Page 6: Wiring Connections
FLEX Integra 16 Sink Input Module Wiring Connections Channel Input Power Channel Input Power connect to connect to corresponding corresponding terminal on terminal on row row B +24V dc Power terminals V are internally connected together in the module. 24V dc Common terminals COM are internally connected together in the common module. -
Page 7: Memory Mapping
FLEX Integra 16 Sink Input Module Indicators 1793-IB16 24 VDC SINK INPUT 9 10 11 12 13 14 15 41812 A = Status indicators - 0 through 15 - shows status of individual inputs B = Insertable label for writing individual input designations Memory Mapping Bit/ 09 08 07 06 05 04 03 02 01 00... - Page 8 FLEX Integra 16 Sink Input Module Setting the Input Delay Time You can select the input delay time (DT) for channels 00 thru 011, and channels 12-15. Select the input delay time by setting the corresponding bits in the output image table (complementary word) for the module. For example, to set a delay time of 4ms for an input module at address rack 1, module group 0, set bits05, 04, 03, 02, 01 and 00 as shown below.
- Page 9 FLEX Integra 16 Sink Input Module Approbation d’utilisation dans des C-UL and UL Hazardous Location Approval environnements dangereux par la C-UL and UL La C-UL and UL certifie des produits pour une C-UL and UL certifies products for general use as utilisation générale aussi bien que pour une well as for use in hazardous locations.
- Page 10 FLEX Integra 16 Sink Input Module Approbation d’utilisation dans des C-UL and UL Hazardous Location Approval environnements dangereux par la C-UL and UL W@SUDTT@H@IUÃ)ÃSv†„ˆrÃqr‘ƒy‚†v‚ WARNING: Explosion Hazard • Substitution of components may impair • La substitution de composants peut rendre ce suitability for Class I, Division 2.
- Page 11 FLEX Integra 16 Sink Input Module Specifications - 16 Input Module Cat. No. 1793-IB16 and -IB16S Module Type 16 digital input - sinking 1793-IB16 - screw-cage terminations 1793-IB16S - spring-clamp terminations Module Location DIN rail mounting Number of Channels 16 (1 group of 16, nonisolated, sinking) On-state Voltage 10V dc minimum 24V dc nominal...
-
Page 12: Derating Curve
FLEX Integra 16 Sink Input Module Specifications - 16 Input Module Cat. No. 1793-IB16 and -IB16S Screw Terminal Torque 5-7 lb-in (0.5-0.6Nm) Agency Certification • C-UL Listed (when product is marked) • C-UL Class I, Division 2 Groups A, B, C and D certified •... - Page 13 Publication 1793-5.8 - December 1999 PN 957259-15 Supersedes publication 1793-5.8 - September 1999 © (1999) Rockwell International Corporation.Printed in USA san Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan...
- Page 14 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
Need help?
Do you have a question about the Flex integra 1793-IB16 and is the answer not in the manual?
Questions and answers