Initial Configuration; Figure 6 Ustip Wizard Screen; Figure 7 Ustip Network Configuration Screen - Raritan P2-USTIP1 User Manual

C 2: I
HAPTER NSTALLATION

Initial Configuration

During initial configuration, the USTIP Setup Wizard helps you quickly set up USTIP for the
first time. The USTIP Setup Wizard appears only when accessing the Administrative Menus on a
non-configured USTIP, and guides you through initial configuration parameters. The easiest way
to perform this initial configuration is by using the Local Admin Console (see 'Physical
Connection' instructions in the previous sections).
1. Power ON USTIP via the power switch on the back of the USTIP unit.
2. The Welcome to USTIP Setup Wizard Screen will appear on the Local Admin Console.
3. Press the letter B on the Local Admin Console keyboard to begin the USTIP Setup Wizard.
4. The Network Configuration Screen appears.
5. Use the Tab, or
space bar, or the
keys when your entry on each line is complete. Below are descriptions of each field, and
the appropriate values to assign.
•
Name: Designate a unique name for this USTIP unit, for example, "MiamiDataCenter."
Please note that this name should contain only alphanumeric characters, no spaces or symbols
permitted. The default name is USTIP.
•
Enable Ethernet Interface: Designates whether USTIP should enable its Ethernet adapter as
active (default: YES).

Figure 6 USTIP Wizard Screen

Figure 7 USTIP Network Configuration Screen

keys to select each line on the Network Configuration screen and the
or keys to toggle between available entries. Press the Enter, Tab or
9