Terminology - Raritan P2-USTIP1 User Manual

4

Terminology

This manual makes use of the following terms to indicate components of a typical USTIP
configuration. While reading the manual, please refer to the diagram below for clarification when
necessary.
Target Server(s) Servers to be accessed remotely via USTIP and its connected KVM
configuration.
Remote PC A Windows-based computer used to access and control target servers
connected to USTIP.
Local Access A user console consisting of a PS/2 keyboard, PS/2 mouse, and VGA
Console monitor, directly attached to USTIP to control target servers locally (not
through the network).
Single-port USTIP models (USTIP1) allow connection of one local access
console.
Local Admin A VT100 terminal directly attached to USTIP, used for administration and
Console setup. From this console, you can access USTIP administration menus
directly. You cannot view Target Servers of the connected KVM
configuration using this screen.
Although USTIP also allows remote administration via the network, the
local admin console provides the most convenient means to perform
initial setup.
USTIP U G
SER UIDE