Programming The Timer - Coleman Hanna 93000 Installation & Operation Manual

Menu
A. Number of Coins to Start Fragrance Valid entries are from 1 to 20 coins to start the vacuum/fragrance machine
B. Number of Seconds per Fragrance This menu creates some confusion for customers. TYPICALLY THIS NUMBER
C. Number of Minutes Per Fragrance Valid entries are from 0 to 9.
D. Number of Times Warning Horn
Beeps
H. Amount of Time per Coin After
the Start-Up Price is Satisfied.
E. Four-digit PIN Code
F: Vacuum Test Time
NOTE:

only to reduce the amount of spare parts that are needed by
the operator. Therefore, a vacuum/fragrance timer will work
in all regular vacuums as well as the fragrance vacuums.

6.3 Programming the Timer

Let's walk through the programming of the timer, step by step.

Begin by pressing the mode switch and holding down for five (5) seconds. The display will
now show the "A" menu.

Now press the set switch until you reach the number of coins it takes to start your vacuum.
(Don't worry if you accidentally go past your number; the timer "wraps around" when you
exceed 20.) Also, note that anytime you press and hold the set switch, the display
increments at 1/2 second increments.
6.3.1 Vacuum

Once you have the proper number displayed on the "A" menu press the mode switch and
release it. This display will now show the "B" menu.

Now, using the set switch input the number of seconds, if any, that you have in your initial
vacuum cycle.

Press the mode switch and the display will show the "C" menu. Using the set switch, enter
the number of minutes you have in your initial vacuum cycle.

Press the mode switch and the "D" menu appears. Using the set switch, enter the number of
seconds that you want the warning horn to sound at the one-minute mark when a customer
is using the vacuum.
Coleman Hanna Carwash Systems
Page 9 of 38
MENUS FOR FRAGRANCE (Not Used)
When the "H" menu is complete, press the mode switch.
Menus "A" - "H" will repeat, allowing you to enter the fragrance information.
IS LEFT AT ZERO. The menu is in place for those customers who have a wash
that starts at 3:30, for example. In this case, you would enter the :30 at this
point. Valid entries are from :00 to :59.
This is the number of times the user would like the warning horn to sound at
the one-minute mark. Valid entries are from :00 to :59. If the menu is left at
:00, the warning horn is disabled.
This is the amount of time that the customer will receive for each additional
coin deposited after the initial turn-on price is deposited.
This menu is used to input the Personal Identification Number. This number
is used to access the timer via the hand-held remote control.
This function sets the amount of time the user can test the vacuum by using
the "TEST" feature on the remote control. Valid entries are from 0:00 to 9:00.
If the unit is set to 0:00, this feature is disabled.
The Vacuum/Fragrance Timer is used in a vacuum
World Class Manufacturing in Car Wash Equipment
SUPER VAC 3 Installation/Operation Manual
Valid Entries
93000/94000 Super Vac
Rev. 2 7/12/10