Installation Guidelines; Theory Of Operation - Coleman Hanna 93000 Installation & Operation Manual

3. INSTALLATION GUIDELINES


Remove hoses and Owners Manual from Dirt Receptacle.

Remove stainless steel shroud from under meter to expose 110V cord.

Unbolt vacuum from wooden crate (save rubber washers on 93000 unit).

Set vacuum cleaner on cardboard and make a template or pattern by cutting out cardboard
in shape of vacuum cleaner.

Take template and set on vacuum base and mark holes for bolts.

Drill holes in concrete using an 1/2 drill bit.

Blow out all concrete dust from holes.

Set vacuum cleaner over holes and hammer in Anchor Bolts. Use ½" x 5½" for 93000 Oval
Vacuum and ½" x 3¾" for 94000 Round Vacuum.

Make sure you install rubber washer between metal washer and vacuum canister to provide
air-tight seal on 93000 unit.

Plug vacuum in to the cord under the shroud.

Install stainless steel shroud back in place.

Open up Vacuum Cabinet with keys provided with Owner's Manual.

Turn on the power to the vacuum cleaner and install a sample coin in the Sensortron.

Refer to Price and Time Setting Sheet to properly set price and time on timer. Unit is preset
to price on decals and normal time.

Drop coins into coin acceptor, check vacuum for proper suction and install vacuum hose.

4. THEORY OF OPERATION


Coins are deposited into coin acceptor.

Coin acceptor sends out a 24V pulse to the timer.

The timer reads the 24V pulse and compares that to the turn on price programmed into it.

Once the proper amount of coins are deposited the timer turns on the 24V Mercury Relay.

The Mercury Relay sends power to the vacuum motors.

The vacuum motors start to run which draws air through the filter bags and vacuum hose.
Coleman Hanna Carwash Systems
Page 6 of 38
World Class Manufacturing in Car Wash Equipment
SUPER VAC 3 Installation/Operation Manual
93000/94000 Super Vac
Rev. 2 7/12/10