Equipment Planning And Arrangement - Coleman Hanna 93000 Installation & Operation Manual

1. EQUIPMENT PLANNING AND ARRANGEMENT

1.1 Unpacking The Equipment
Before any operation can be carried out there must be a time of planning. This is no different for
the installation of the 93000/94000. Carefully plan the 93000/94000 layout and setup before
starting the installation process.
Thoroughly inspect each component for visible damage. Uncrate the equipment only if there is
no damage.
 NOTE: Carefully inspect and evaluate the freight
upon arrival. If there is damage to any boxes or crates
immediately report it to the freight carrier.
1.2 Using Suggested Installation Procedures
This manual contains suggested installation guidelines. (Section 3)
Completely read through this manual prior to beginning installation. This will ensure a proper
understanding of the system and its installation procedures.
Coleman Hanna Carwash Systems
Page 4 of 38
The installation
involves high and low voltage electrical
connections. Only qualified and trained
personnel should be used in it's hook-up.
This equipment's circuit protection is
located in the main electrical panel of the
building supplying power to this device.
Insure that this protection is in place and
rated according to the guidelines set forth
on the equipment not to exceed 15 amps.
World Class Manufacturing in Car Wash Equipment
SUPER VAC 3 Installation/Operation Manual
of this equipment
93000/94000 Super Vac
Rev. 2 7/12/10