Installation; Risk Of Fire - Asko TD75 Installation Instructions And Owner's Manuals

Dear Customer,
Read these instructions carefully and completely before you install the machine. The installation should
be carried out by a qualifi ed person who is familiar with all local codes and ordinances for electrical and
plumbing connections. See also the general Safety Instructions in the Use & Care Guide.
Cosmetic damage must be reported to the ASKO dealer within fi ve days from the date of purchase. As soon
as you unpack the machine, thoroughly check it for cosmetic damage.

INSTALLATION

WARNING
Install the clothes dryer according to
the manufacturer's instructions and
local codes.
To reduce the risk of of severe
injury or death, follow all installation
instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
WARNING
dryer installation must be performed
by a qualifi ed installer.
DRYER PLACEMENT
The dryer can be either free standing or installed onto
a washing machine.
The dryer emits heat. Therefore, do not place it in a
very small room, as the drying process may be longer
due to limited amount of available air.
Do not place the dryer in a room where
temperature can drop below 0 °C, as the machine
may not operate correctly at such low temperatures,
or freeze, which in turn can result in damage to the
machine.
Install the dryer in a room with adequate ventilation and
a temperature between 10 °C and 25 °C.
2
- Risk of fi re.
- Clothes
Customer Care Center, 1-800-898-1879, www.askousa.com
Do not place the dryer behind lockable or sliding
door, or door with a hinge on the opposite side of the
dryer door hinge. Install the dryer in such way that the
door can always be freely opened.
Never block the air exhaust (evacuation opening).
At least two persons are required to install the
tumble dryer on top of a washing machine.
Do not place the dryer on a carpet with long fi bres
as this may impede air circulation.
The appliance may not be in contact with a wall
or adjacent furniture. For optimum dryer operation,
observe the clearance from the wall as shown in Fig.