Assembly And Use Of The Nutri Ninja ™ Cups - Ninja BL492 Instructions Manual

Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja Cup upon completion of
blending. Do not store ingredients before or after blending them in the cup with the blade assembly
attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed
container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in
the cup, only use Sip & Seal
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 2
1
Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Add ingredients to the Nutri Ninja Cup.
4
Place the Pro Extractor Blades
and tightly screw it on clockwise until you have a good
seal. (Fig. 1)
5
Turn the selected cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor
base. Rotate the cup clockwise until it locks in place,
you will hear a click when the lock is engaged. (Fig. 2)
6 Once the cup is engaged, the programs available for
that attachment will illuminate. (Fig. 3) The Auto-iQ
program will stop the appliance automatically at the end
of the program.
7
To pause the appliance, press the selected speed or
Auto-iQ program a second time.
™
Assembly with care, as the blades are sharp.
™
Lid to cover.
™
USE
Fig. 3
onto the selected cup
™
™
Cups
Fig. 4
8
Once you have reached your desired consistency,
press the START/STOP button to turn the program off.
Turn the cup counter-clockwise and pull straight up to
remove. (Fig. 4, Fig. 5)
9 Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades counter-
clockwise. (Fig. 6)
10 Do not store blended contents with the Pro Extractor
Blades Assembly attached.
11 Place the Sip & Seal
to seal and enjoy!
12 For storage, only use Sip & Seal lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
14 Make sure that the motor base is unplugged when not
in use.
15 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.
REMOVAL
Fig. 5 Fig. 6
lid onto the Nutri Ninja Cup, twist
™
www.ninjakitchen.com 14