Table 3. Control panel functions (continued)
Item
Label
10
PS ON/OFF
11
EMERGENCY
28
Indicator
Description
Switch
Used to power on/off the disk array. During normal
operation, this switch should be in the ON position.
The switch functions only if:
• The PS ENABLE switch
position.
and
• The PS REMOTE/LOCAL switch
LOCAL position.
Caution: Do not change the switch position unless
directed to do so by HP service personnel.
LED
During normal operation, this LED should be on.
(Red)
On: The UNIT EMERGENCY POWER OFF switch on
the back of the disk array cabinet is in the ON position.
Off: The UNIT EMERGENCY POWER OFF switch is
in the OFF position. Place a service call to HP to have
an HP support representative reset the switch.
HP StorageWorks XP12000 Disk Array Owner's Guide
(9)
is in the ENABLE
(13)
is in the