HP StorageWorks XP12000 Owner's Manual page 26

Table 3. Control panel functions (continued)
Item Label
4 SUB-SYSTEM
RESTART
5 REMOTE
MAINTENANCE
PROCESSING
6 REMOTE
MAINTENANCE
ENABLE/DISABLE
26
Indicator Description
Switch If a blocked path occurs between a host and a disk drive,
this switch is used to unfence the fenced drive path and
to release Write Inhibit.
During normal operation, this switch should be in the
upper position.
Restarting the subsystem performs a soft reset to try to
recover. If the system restart does not unblock the path,
an HP support representative will be notified.
Caution: Do not change the switch position unless
directed to do so by HP service personnel.
LED During normal operation, this LED may be on if remote
(Amber) maintenance is allowed (the REMOTE
MAINTENANCE ENABLE/DISABLE switch
the ENABLE position).
On: Remote maintenance is in progress. An HP support
representative is probably working on the system, but
the system is online and accepting data.
Switch Used to permit remote service maintenance. During
normal operation, this switch should be in the ENABLE
position.
Disable: No one can provide remote maintenance.
Enable: An HP support representative can provide
remote maintenance.
Caution: Do not change the switch position unless
directed to do so by HP service personnel.
HP StorageWorks XP12000 Disk Array Owner's Guide
(6) is in