Cypress EX-USB FX3 Programmer's Manual page 177

12.The next settings are also for the Linker. Click on "ARM Sourcery Windows GCC C Linker". Click
on "General" and add the linker script file. Click on Apply.
13. The next settings are also for the Linker. Click on "ARM Sourcery Windows GCC C Linker". Click
on "Miscellaneous" and add the libraries to be linked. The actual command is
-Wl,-d -Wl,--no-wchar-size-warning -Wl,--entry,CyU3PFirmwareEntry
"${FX3_INSTALL_PATH}\firmware\u3p_firmware\lib\fx3_debug\cyfxapi.a"
"${FX3_INSTALL_PATH}\firmware\u3p_firmware\lib\fx3_debug\cyu3thread
x.a"
"${ARMGCC_INSTALL_PATH}\lib\gcc\arm-none-
eabi\\${ARMGCC_VERSION}\libgcc.a"
FX3 Programmers Manual, Doc. # 001-64707 Rev. *C
"${ARMGCC_INSTALL_PATH}\arm-none-eabi\lib\libc.a"
FX3 Development Tools
177