Battery Backup - Kidde P4010ACS User Manual

Photoelectric smoke with voice and hardwire interconnect, intelligent smoke alarm, ambient light sensor
Table of Contents

Advertisement

carbon Monoxide (cO) nuisance
wArnIng: tHIS UnIt dOeS nOt detect cO, bUt It wIll trAnSMIt A cO AlArM SIgnAl frOM An In-
tercOnnected cO Or SMOKe/cO cOMbInAtIOn AlArM. It IS IMpOSSIble tO deterMIne tHe SOUrce
Of A cO AlArM USIng SIgHt Or SMell. AlwAyS cOnSIder A cO AlArM eVent AS dAngerOUS.
Pushing the button on the initiating CO or Smoke/CO combination alarm will silence that alarm and all compatible
interconnected units.
Pushing the button on any hard-wire smoke alarm will do nothing to silence an interconnected CO alarm.

12. Battery Backup

This alarm is powered with AC power, but also contains a sealed lithium battery backup system. No battery installation or
replacement is necessary for the life of the alarm.
nOte:
AC power must be connected to obtain the full 10 year battery and unit life. Constant exposure to high
or low humidity or temperatures may reduce battery life.
wArnIng: nO SerVIceAble pArtS InclUded. dO nOt AtteMpt tO Open tHe AlArM fOr Any
reASOn! dO nOt try tO repAIr tHe AlArM yOUrSelf.
low battery
This alarm is equipped with a low battery monitor circuit. If the battery capacity can no longer provide adequate power
for all alarm functions, the low battery condition will occur. See Troubleshooting Guide. The unit must be replaced with-
in 7 days of the first occurrence of the "Low Battery Warning" to provide continuous alarm protection.
18

Advertisement

Table of Contents
loading

Table of Contents