ABB AC 800M Library Object Style Manual page 79

Section 5 Operator Interface
Example:
For other data types, for example: real and time, no Value text is necessary. It is the
value itself that is displayed in the Confirm Write dialog.
The mapping between the value and the Confirm Value NLS string is made in the
Confirm Write Support aspect on the type.
The Operation has a default configuration which is "'Set ' %P ' to ' %V" where %P
and %V refers to configured Property Name and Property Value, respectively.
The NLS identifiers for the Confirm Operation dialog shall be named as the
identifiers for the faceplate, but with a '_AM' suffix.
For Control Builder standard libraries, the NLS identifiers for the Confirm Write
dialog shall be configured in the 'NLS Resource Manager for AM' which is located
under Object Type Structure - Libraries - Access Management.
For user defined libraries a corresponding NLS Resource Manager shall be added
for example in a sub object to the Libraries object.
Example:
This example shows the configuration for the action when ordering the manual
value to On. The involved property is InteractionPar.ManValue. When pressing the
On button in the faceplate the dialog shown in
3BSE042835-600
Table 11.
Property: SignalErrorMode (dint)
Value
1
2
3 Pre-determined
Support for Confirm Operation Dialog
Description
Through
Freeze
Figure 24 appears.
79