ABB AC 800M Library Object Style Manual page 64

Introduction
Figure 14. (left) Example of an Interaction window and (right) an Information
window.
The instance name on the Interaction window (left image on
Faceplate. The instance name on the Information window (right image on
Figure
Interaction windows shall have a name related to the functionality (for example,
InfoAlarm, where alarm settings are to be done).
Information windows are activated from the Interaction window. Control modules,
Function Blocks, and Diagrams designed for engineering interaction, shall have one
or more interaction windows. The engineer may then control the control module or
Function Block from these windows.
The information that can be contained in a window can be divided into three
categories:
•
•
•
64
14), where interaction parameters are assigned, is called InfoPar. Additional
Settings of functions to be used continuously which can be affected both by
operator and program code.
– Example: Integration time for a controller.
Commands with or without associated input fields that can be affected both by
operator and program code.
– Example: Get a certain recipe (recipe name and the command itself
needed).
Presentation only.
– Example: Actual value for a controller.
Section 4 Engineering Interface
Figure 14) is called
3BSE042835-600