ABB AC 800M Library Object Style Manual page 68

Design
possible to have separate buttons (for example, pairs Apply/Undo) for the different
logical groups.
Figure 15. Grouping of option buttons.
The following rules should be used in the control module for the interaction
window:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
68
Grid size = 0.02
Text height = 0.1
Text height for group = 0.08
Distance to borders = 0.02
Distance between texts in a group (vertically) = 0
Distance between groups can vary, yet be at least 0.02
Straight (aligned) columns in each group
Check boxes, option buttons and input fields are used for inputs
Icons can be used for distinct indications. It is also permitted to use check
boxes and option buttons in the same way as a dynamic input field
"Apply" / "Undo" buttons when two or more interdependent input fields. The
buttons should have size 0.3x0.1
Input fields should be center aligned
For option buttons and check boxes, the text should be to the right of the
interaction object.
The caption texts in an operator window should have the height 0.16.
A value may have a ResetIcon to the right. Selecting the ResetIcon will reset
the value (to initial value) or, in some cases, other reasonable values.
Color assignment shall follow common guidelines and regulations, for example
red for alarm indication, and yellow for warning indication. Use project
constants (cColor) to assign colors to objects.
Section 4 Engineering Interface
3BSE042835-600