Display Otv Overlay State - Cisco Nexus 7000 Series Configuration Manual

Display OTV Overlay State

Local Edge Device Information:
Site Information for Overlay1:
Bridge-domain 101
Name:: Bridge-Domain101
Administrative State: UP
Display OTV Overlay State
In the following example, the Tunnel Stitch field displays enabled state, indicating that the OTV part of the
VXLAN OTV tunnel stitching is enabled:
BL1# show otv internal overlay detail
Overlay interface Overlay1 idx: 1635021663
Overlay interface idx: 0x22080001
VPN name
Device ID
Protocol state
Tunnel Stitch
Tier Id
Pend Tier Id
Tier Id State
Refcount
.
.
In the following example, the overlay ID and the VXLAN-to-OTV tunnel stitching status are displayed. In
the Enable column, Y indicates that the OTV part of the tunnel is enabled:
BL1# show otv internal tunnel-stitch
Overlay
---------
Overlay1
In the following example, you can see that ARP proxy is enabled under the OTV overlay:
Ensure that you also enable ARP suppression under the VXLAN overlay at the same time. Alternatively,
Note
disable the ARP proxy/suppression function under both the overlays.
BL1# show otv internal arp-nd status
Overlay: Overlay1
Suppress arp-nd: Enabled
VNI Suppress ARP:
Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide
126
Full - Both site and overlay adjacency up
Partial - Either site/overlay adjacency down
Down - Both adjacencies are down (Neighbor is down/unreachable)
(!) - Site-ID mismatch detected
Hostname BL1
System-ID 002a.6a65.09c1
Site-Identifier 0000.0000.000a
Site-VLAN 101 State is Up
Site-VLAN-Cfg 0
Site-VNI 10001
(1 ports in all)
vni10001
nve1
: Overlay1
: 8c60.4f04.21c6
: UP
: enabled
: 1
: 0
: Done(4)
: 6
Enable Tier-id
------ -------
Y 1
Operational State: UP
Interface state
Tier-pend-id State Detail
------------ ----- -----------
0 4 Done
VXLAN BGP EVPN and OTV Interoperation
: UP