Table of Contents
Advertisement
Connections
Many vehicles are already fitted with ISO connectors behind the dashboard, including all the electrical cabling for installing a car radio. In such cases,
the connections fitted to the vehicle can be directly plugged into the car radio connectors. If your car is not already fitted with these connectors, we
strongly advise you to obtain an ISO connector from a specialist shop or from your car dealership. Once you have obtained the connector, you will only
need to connect your loudspeakers and the power supply to the ISO cable following the connection instructions below.
Location
Connector A
1
2
3
4
Battery 12V(+)/yellow
5
Antenna/Amp control/blue
6
7
ACC+/red
8
Ground/black
InstALLAtIon
Function
Connector B
Rear Right (+) - Purple
Rear Right (-) - Purple with Black Stripe
Front Right (+) - Gray
Front Right (-) - Gray with Black Stripe
Front Left(+) - White
Front Left(-) - White with Black Stripe
Rear Left (+) - Green
Rear Left (-) - Green with Black Stripe
Note: Incorrect wiring or operation will void the warranty of this unit.
The manufacturer cannot be held responsible for any malfunctions
if the connections are not made properly.
GB - 4
Advertisement
Table of Contents
