Hotpoint LTF11M121OUK Service Information page 28

Indesit Company
PROGRAMMING (Using EMIT)
The dishwasher can be programmed via the Emit PC, using a USB to Serial lead
(Part No. C00222800), Hardware Key (Part No. C00115587) and the Memwriter software.
Black Serial Hardware Key
Replacement pins for the Hardware Key are
available as Part No. C00114723 (Qty = 1)
The Black Hardware Key and USB Serial Cable will be replaced with a new style Hardware Key and
Cable which now has a USB connection. It has shorter, more robust pins, similar to those currently
fitted into the SmartCard Reader. It is not possible to mix old and new (below) cables or keys.
Note: The power light on the Key above is GREEN. The clear type Key below has a RED light.
Note: - The USB Hardware Key also supports a low voltage connection point which allows an
external power supply to be connected to the Hardware Key which enables the main module to be
programmed with a settings file prior to fitting it to an appliance. ** NOT applicable to UK Service
Engineers. Do not connect anything to this connection point.
USB Hardware Key - C00289048
Low Voltage
Connection Point
(not used)
Service Manual UK
USB - Serial Cable
USB Cable C00289046
These items are supplied separately
28 of 40
Other types of Cable exist
USB
Connection
English