LTF 11S112 English Operating instructions DISHWASHER - Contents Operating instructions, 1 Precautions and advice, 2-3 Product Data, 4 Installation, 5-6-7 Description of the appliance, 8 Refined salt and rinse aid, 9 Loading the racks, 10-11 Detergent and dishwasher use, 12...
Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards.
Page 3
• Only begin a wash cycle when the commitment to helping the environment, dishwasher is full. While waiting for the Hotpoint reserves the right to use quality dishwasher to be filled, prevent unpleasant recycled components to keep down odours with the Soak cycle...
Product Fiche Product Data (product fiche) Product Fiche HOTPOINT ARISTON Brand LTF 11S112 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) 302.0 Energy consumption per year in kWh (2) 1.07...
Installation be function properly. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto Make sure the hose is not bent, compressed or kinked. its back. DO NOT overtighten the hose connector, hand tight is Positioning and levelling sufficient.
Electrical connection Changing the Mains Lead A lead can be ordered from Hotpoint Service Before inserting the plug into the electrical socket, make UK: 08709 066 066 or sure that: Republic of Ireland: 1850 302 220 • The socket is earthed and complies with current - If you have damaged the existing lead or require a longer one regulations;...
(depending on the The machine has a buzzer/set of tones Technical data dishwasher model ) to inform the user that a command has width 59,5 cm been implemented: power on, cycle end etc. Dimensions height 82 cm depth 57 cm The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed Capacity...
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Third rack* Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent and rinse-aid dispensers and device Active Oxigen Data plate Control panel Control panel Delayed start button Select wash cycle button Zone Wash button...
Refined Salt and Rinse Aid Average autonomy Only use products which have been specifically designed Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day Follow the instructions given on the packaging. level °dH °fH...
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water.
Page 11
The upper rack can be adjusted for height based on requirements: The geometry of the rack makes it possible to place such small high position to place bulky crockery in the lower rack and low items as coffee cups in the area in the middle. position to make the most of the tip-up compartments/sectors by creating more space upwards.
Detergent and dishwasher use Measuring out the detergent Starting the dishwasher 1. Turn the water tap on. Good washing results also depend on the correct amount of detergent being used. Exceeding the stated amount does not 2. Open the door and press ON-OFF button: the ON/OFF indicator lights, options and the display come on.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water...
Special wash cycles and Options Notes: Extra drying Optimum performance levels when using the “Fast wash” To improve the dryness level of the crockery, press and “Express 30’” cycles can be achieved by respecting the EXTRA DRYING button, the indicator light/symbol will the specified number of place settings.
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They must be cleaned if you wish to achieve the best results in •...
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •...
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer.
We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448 224 224 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to...
Need help?
Do you have a question about the LTF 11S112 and is the answer not in the manual?
Questions and answers