H Time Program - Explanatory Remarks - Viessmann Dekamatik-M1 Operating Instructions Manual

2.4 Settings and Adjustments
Time program - Explanatory remarks
General information
A time program consists of switch-on and
switch-off times which are set on the
Comfortrol control unit. Depending on the
heating program you have selected, these
control the switching (on and off) of:
Illustration of the default factory timer program
10
- normal operation
(room heating ON )
- reduced operation
(room heating ON )
- standby mode
(room heating OFF)
- domestic hot water heating
(if installed)
Example:
Heating program " "
(Domestic hot water ON/room heating ON)
Please note:
" " knob not turned to "0".
Activation time: i.e. 6:00 HRS
Changeover from reduced operation to
normal operation
Activation time i.e. 22:00 HRS
You can set up to four activation periods per
day for room heating and domestic hot
water heating
Example of activation periods
for room heating: 05:00 - 08:00 HRS
11:00 - 13:00 HRS
16:00 - 18:00 HRS
21:00 - 24:00 HRS
Only the first activation period is preset in the
factory.
Switch-on time:
Switch-off time:
The use of the selectable activation periods
ensures economic fuel consumption.
"on" and "off"
reaction times
6:00 HRS
22:00 HRS