Dimming Lights - Radio Shack Plug 'n Power 61-2677C Owner's Manual

61-2677CD.fm Page 17 Tuesday, July 6, 1999 11:05 AM

DIMMING LIGHTS

You can dim any lights that are connected to lamp dimmer
modules.
1. Set the mini controller's selector switch to the desired
unit code range ( 1 – 4
2. Press the switch for the unit code of the lamp dim-
ON
mer modules you want to dim (
3. Hold down DIM until the light dims to the desired level. If
you dim the lights too much, hold down
the light level.
Caution: Do not connect anything other than a lamp to a
lamp dimmer module. The dimmer circuit might damage
other devices.
or 5 – 8 ).
1 / 5 , 2 / 6 , 3 / 7 , or
BRIGHT
4 / 8 ).
to raise
17