Yamaha MX800V Service Manual page 93

PISTONS, CAMSHAFT, CRANKCASE, AND CRANKSHAFT
1
2
a
b
2 1 2
8.
Install:
• Connecting rod cap #2 "1"
• Connecting rod cap #2 bolts "2"
Connecting rod cap bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
TIP
• Make sure that the " " mark "a" on the connecting rod #2
is aligned with the " " mark "b" on the connecting rod cap
#2.
• Tighten the connecting rod cap #2 bolts alternately two
to three times.
9.
Install:
• Camshaft
(Refer to "INSTALLING THE VALVE LIFTERS AND
CAMSHAFT" on page 3-44)
• Crankcase cover 1
(Refer to "INSTALLING THE CRANKCASE COVER
1" on page 3-46)
3-55
1
2
3
4
5
6
7
8
9
10