Casio V-T500-E Hardware Manual page 10

Table 1.4 Name and function of each part
No. Name
1 Power Key
2 Sound Volume Key
3 HDM Connector
4 SD Card Slot
5 Recharge Indicator LED
6 Notice Indicator LED
7 Illuminance Sensor
8 Inner Camera
9 Display (Touch Panel)
10 Microphone
11 NFC Reading Part
12 Button, Function A
13 Button, Function B
14 Screen Lock Button
15 USB A Port
16 USB miniB Port
17 DC Jack
18 Charge/Communication
Terminal
19 Mount
20 Reset Switch
21 Outer Camera
22 Catch for Screen Cover
23 Catch for Pen Holder
24 Extension Slot
25 SAM Card Slot
26 SIM Card Slot
27 Configuration Switch
28 microSD Card Slot
29 Buzzer
30 Speaker (L)
31 Speaker (R)
32 Rechargeable Battery
Pack Cover
33 Rechargeable Battery
Pack Cover Lock Switch
Key to turn on and off of the power of the terminal.
To control of sound volume.
For connection with external MIDI equipment.
Slot for SD card
Lit up with Orange: Under recharge.
Blinking with Orange: Battery power is 0% to 5%.
Lit up with Green: Recharge completed.
Lit up with Red: Abnormal battery pack or out of rechargeable temperature
range.
Also lit up Green for about 1 second when power turn to ON..
LED to activate applications.
Automatically adjusts the back light brightness depending on the ambient
luminosity.
For capturing images and shooting pictures.
Operatable by finger touch and allows text input or screen handling by
optional pen-type digitizer.
For input of voice.
Card data is read by shading this part with card.
Button to activate applications.
Button to activate applications.
Pushing this button allow to lock or unlock the screen.
To connect the terminal with external USB equipment.
To connect the terminal with external USB equipment.
To connect the terminal AC Adaptor or In-vehicle adaptor.
To change battery in the terminal put on the cradle, and use for USB/LAN
communication.
To attach system case, hand belt and neck strap.
The terminal is reset by push of this switch.
For capturing images and shooting pictures.
To attach screen cover.
To attach pen holder of pen-type digitizer.
Provided for extension of system.
To insert SAM card. (removal of rechargeable battery pack is required.)
To insert SIM card. (removal of rechargeable battery pack is required.)
To configure start-up conditions of the terminal, system administrator use
only. Users shall refrain from touching this switch.
To insert microSD card.
(removal of rechargeable battery pack is required.)
For generation of beeping buzzer.
For sound output.
For sound output.
Rechargeable battery pack to be installed inside the cover.
For open/close of rechargeable battery pack cover by rotating this part.
10
Description