Casio CASSIOPEIA PA-2400W Hardware Manual

Hide thumbs


Quick Links

Hardware Manual
(Version 1.01 US)
CASIO Computer Co., Ltd.
Copyright © 1999. All rights reserved.
September 1999



  Also See for Casio CASSIOPEIA PA-2400W

  Related Manuals for Casio CASSIOPEIA PA-2400W

  Summary of Contents for Casio CASSIOPEIA PA-2400W

  • Page 1 PA-2400W Hardware Manual (Version 1.01 US) CASIO Computer Co., Ltd. Copyright © 1999. All rights reserved. September 1999...
  • Page 2: Table Of Contents

    Table of Contents Chapter 1. Overview Features Chapter 2. System Configuration System Block Diagram Available Model Available Options PC Card Chapter 3. External View Chapter 4. Specifications Memory Touch Panel Display Switches Communication Ports 4.6.1 16-pin Serial Interface 4.6.2 IrDA Interface 4.6.3 3-pin Interface PC Card Interface...
  • Page 3: Overview

    1. Overview This hardware manual describes the hardware specifications and descriptions of the H/PC (CASSIOPEIA PA-2400W). The model runs the Windows CE US Ver2.11 operating system. MS-DOS and Windows are registered trademarks of Microsoft Corporation in the United States and/or other...
  • Page 4: Features

    1.1 Features For the features of pre-installed software products, please refer to Chapter 1.1 “Features” on page 3 of PA- 2400W Software Manual.
  • Page 5: System Configuration

    2. System Configuration 2.1 System Block Diagram The system block diagram shows typical system configuration with the PA-2400W and its dedicated options available. The system configuration can meet various needs required by end-users. Fig. 2.1 System Block Diagram # 1- % -9#%  $   !!&+ 78...
  • Page 6: Available Model

    PC connection TPX1375-010100 RS-232C cross-type cable To be supplied with cable (no. 33356594) PA-2400W. 3-pin cable SB-62 For connecting Casio digital Existing product camera and an existing model 3-pin BCR BR-100 Pen scanner Existing product Compact flash card CF-AD1-S Compact flash to PCMCIA...
  • Page 7: Pc Card

    Operability of PC card not listed in Table 2.3 above must be checked thoroughly by user if it is used in the PA-2400W. CASIO will assume no responsibility against malfunction, damage in the PA-2400W or whatsoever caused by using locally available card.
  • Page 8: External View

    3. External View Fig. 3.1 External view of PA-2400W L I G H T C A S S I O P E I A P O W E R      C H G S Y S C F C A R D...
  • Page 9: Specifications

    4. Specifications 4.1 CPU Table 4.1 CPU Item Specification Remark Hitachi SH-3 Clock 80 MHz 4.2 Memory Table 4.2 Memory Item Specification Remark DRAM 8 MB System memory, object storage memory MASK ROM 16 MB (8MB x 2 pcs) System ROM 4.3 Touch Panel Table 4.3 Touch Panel Item...
  • Page 10: Switches

    Baud rate Max. 115.2 Kbps (IrDA ver. 1.0) Note: Due to individual IrDA’s specifications of a target device, communication via the IrDA interface may not be possible. Always make sure first the connectivity and operability of the PA-2400W with a device.
  • Page 11: 3-Pin Interface

    Note: A PC card that requires more than 300 mA as its operation power cannot be installed to the PA-2400W. Use of such the card may result the life of battery to be shorten or the low battery warning message to appear earlier or that the PA-2400W itself turns off the power without any advanced warning message.
  • Page 12: Power Supply

    With fully charged lithium-ion battery pack: 36 days Note: Temperature and humidity surrounding the PA-2400W can severely affect the operating hour of installed batteries. High temperature and humidity will cause the battery life to be shorten. 4.10 Speaker Table 4.12 Speaker...
  • Page 13: Microphone

    4.11 Microphone Table 4.13 Microphone Item Specification Remark Microphone Electronic condenser type For audio input Sampling rate: 10-bit AD 8/11.025/22.05 KHz 4.12 LED Table 4.14 LED Item Specification Available LED Remark Alarm notification x 1 Notification LED Battery status indication x 1 Full-charge condition LED Green 4.13 Dimensions and Weight...