Chevrolet Corvette 2001 Manual page 6

electrical connector from lighter. Remove trim plate. Remove shift control closeout cover
retaining nuts, and remove cover. Shift transmission into Neutral.
6. Press down to engage shift control neutral lock pin. Remove transmission shift rod clamp
bolt. Remove shift control mounting bolts. Raise shift control assembly to release locator
from shifter bracket on side of driveline support assembly. Release shift control from
transmission shift rod and remove shift control assembly. See Fig. 2 .
Fig. 2: Removing Shift Control Assembly
Courtesy of GENERAL MOTORS CORP.
7. Using a flat-blade screwdriver, carefully pry out courtesy lamp assembly from left lower
instrument panel closeout panel. Remove push-on retaining nut from steering column
bracket stud. Release lower closeout panel push-in retainers from instrument panel support
beam. Insert courtesy lamp assembly up through opening in closeout panel. Lower and
remove panel by releasing notch in right front edge of panel from tab on accelerator pedal
2001 Chevrolet Corvette
2000-01 CLUTCHES Corvette