Advertisement
EN
Spektrum Transmitter Setup
In the VTX control menu, defi ne the band, frequency and power level, then press
send to apply the changes. The model must be bound (connected) and the
receiver and video transmitter must be powered on for the function to operate.
Pit mode puts the video transmitter in a very low power mode for testing in the pits.
The video transmitter must be properly connected and powered on for the change
to take place.
Troubleshooting Guide
Problem
Frequency control system not
working
Very short video range
1-YEAR LIMITED WARRANTY
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free from defects in materi-
als and workmanship for a period of 1 year from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage
due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to
improper use, installation, operation or maintenance, (iii) modifi cation of or to any part
of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized
service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product
not compliant with applicable technical regulations, or (vii) use that violates any applicable
laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WAR-
RANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WAR-
RANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PROD-
UCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER'S INTENDED USE.
Purchaser's Remedy
Horizon's sole obligation and purchaser's sole and exclusive remedy shall be that Horizon
will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be
defective. Horizon reserves the right to inspect any and all Product(s) involved in a war-
ranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof
of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PRO-
VIDED UNDER THIS WARRANTY IS THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN
ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WAR-
RANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY,
EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further,
in no event shall the liability of Horizon exceed the individual price of the Product on which
liability is asserted. As Horizon has no control over use, setup, fi nal assembly, modifi ca-
tion or misuse, no liability shall be assumed nor accepted for any resulting damage or
injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as
the purchaser or user are not prepared to accept the liability associated with the use of
the Product, purchaser is advised to return the Product immediately in new and unused
condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to confl ict of law principals). This
warranty gives you specifi c legal rights, and you may also have other rights which vary from
state to state. Horizon reserves the right to change or modify this warranty at any time
without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or
service. Once assembly, setup or use of the Product has been started, you must contact
your local distributor or Horizon directly. This will enable Horizon to better answer your
questions and service you in the event that you may need any assistance. For questions
Possible Cause
Serial signal not connected properly
Separate power supply for the video transmitter and no
common ground connected
Model not powered on or not bound (connected)
PIT mode selected
Antenna adaptor or antenna damaged
Power supply is insufficient to deliver required power
RP-SMA anntena used so the antenna is effectively not
connected
Confi rm the serial signal is properly connected.
Connect ground between video transmitter and control receiver
Confi rm model is powered on and bound to the transmitter
Select 25mW, 200mW or 600mW for use
Replace antenna adaptor or antenna
Connect power supply for video transmitter directly to battery or use a
seprate battery
Using an RP-SMA antenna on and SMA connector will burn out the video
transmitter. Replace the RP-SMA antenna with a standard SMA antenna
or assistance, please visit our website at www.horizonhobby.com, submit a Product Sup-
port Inquiry, or call the toll free telephone number referenced in the Warranty and Service
Contact Information section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you
live and use the Product in, please use the Horizon Online Service Request submission
process found on our website or call Horizon to obtain a Return Merchandise Authoriza-
tion (RMA) number. Pack the Product securely using a shipping carton. Please note that
original boxes may be included, but are not designed to withstand the rigors of shipping
without additional protection. Ship via a carrier that provides tracking and insurance for
lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives
and is accepted at our facility. An Online Service Request is available at http://www.
horizonhobby.com/content/_service-center_render-service-center. If you do not have
internet access, please contact Horizon Product Support to obtain a RMA number along
with instructions for submitting your product for service. When calling Horizon, you will be
asked to provide your complete name, street address, email address and phone number
where you can be reached during business hours. When sending product into Horizon,
please include your RMA number, a list of the included items, and a brief summary of the
problem. A copy of your original sales receipt must be included for warranty consider-
ation. Be sure your name, address, and RMA number are clearly written on the outside
of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a
LiPo battery, please contact the appropriate Horizon Product Support offi ce.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the
proof-of-purchase date. Provided warranty conditions have been met, your Product will
be serviced or replaced free of charge. Service or replacement decisions are at the sole
discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment
will be required without notifi cation or estimate of the expense unless the expense ex-
ceeds 50% of the retail purchase cost. By submitting the item for service you are agree-
ing to payment of the service without notifi cation. Service estimates are available upon
request. You must include this request with your item submitted for service. Non-warranty
service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed
for return freight. Horizon accepts money orders and cashier's checks, as well as Visa,
MasterCard, American Express, and Discover cards. By submitting any item to Horizon for
service, you are agreeing to Horizon's Terms and Conditions found on our website http://
www.horizonhobby.com/content/_service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be ser-
viced. Further, the sender will be responsible for arranging return shipment
of the un-serviced Product, through a carrier of the sender's choice and at
the sender's expense. Horizon will hold non-compliant Product for a period
of 60 days from notifi cation, after which it will be discarded.
Solution
10/15
5
Advertisement
