AXIS Q1615-E Mk II Network Camera
AXIS Video Motion Detection
4. From the Trigger drop-down list, select Applications and then select nMD 3.
5. Configure other settings as required. For example, to only record video during certain time periods, select a Scheoule.
6. Under Actions, select Recoro nioeo from the Type drop-down list.
7. Select the stream profile and storage device to use and configure the pre- and post-trigger times.
8. Make sure that the rule is enabled and then click OK.
lote
To appear in the Trigger list, the application must be started and its status must be Idle or Running.
46