Louver Control - Fujitsu ASU7RLF1 Service Instructions Manual

4. LOUVER CONTROL

For Compact Wall Mounted Type < ASU7/ 9/ 12RLF1
1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
The Remote Controller's display does not change.
If you set the angle to position
DRY mode, they automatically return to position
In COOL or DRY mode, if the angle is set to position
condensation may be formed, and the drips may wet your property.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry mode
Heating mode
During AUTO or Heating mode operation, for the first a few minutes after beginning operation,
air-flow will be horizontal
The air flow direction setting will temporarily become
low at the start of the Heating mode.
2. SWING OPERATION
To select V ertical Airflow Swing Operation
When the swing signal is received from the remote controller, the vertical louver starts to swing.
( Table 3 : Swinging range )
The type of operation
Cooling / Dry mode
Fan mode (
The SWING operation may stop temporarily when the air conditioner's fan is not operating,
or when operating at very low speeds.
To select Horizontal Airflow Swing Operation
(No function)
④～⑦
for more than 30 minutes in COOL or
Horizontal flow
Downward flow
①
; the air direction cannot be adjusted during this period.
)
>
③
.
④～⑦
for many hours,
①
when the temperature of the air -flow is
Range
01-10
( Fig. 6 : Vertical air direction range )
①
②
③
④
⑤
⑥ ⑦